FURSE ESP Signal SPD Space ritical applications
Product Name：FURSE ESP Signal SPD Space ritical applications
Product Model：ESP 06Q,ESP 15Q,ESP 30Q,ESP 50Q,ESP 110Q,ESP TNQ,ESP RTDQ
Updated：2010.04.08
Views：3
Space saving protectors for use on signal and data lines in petrochemical and other space/size critical applications 16
Use these protectors where installations space is at a premium and large numbers of lines require protection
| Product part codes: | |
| ESP 06Q | Use with working voltages of up to 6 volts |
| ESP 15Q | Use with working voltages of up to 15 volts |
| ESP 30Q | Use with working voltages of up to 30 volts |
| ESP 50Q | Use with working voltages of up to 50 volts |
| ESP 110Q | Use with working voltages of up to 110 volts |
| ESP TNQ | Suitable for Broadband, POTS, dial-up T1/E1, lease line and *DSL telephone applications |
| ESP RTDQ | Suitable for three wire RTD installations for a working voltage of up to 6V |
 |
Very low let-through voltage (enhanced protection to BS EN 62305) between all lines - Full Mode protection |
|
Full mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment |
|
Almost twice as space efficient as smallest competitor |
|
Removable (plug-in) terminals allow pre-wiring of cable looms, for easier installation |
|
Standard DIN module (18mm) depth |
|
ESP TNQ is suitable for telecommunication applications in accordance with Telcordia and ANSI Standards |