FURSE ESP Signal SPD PCB mount (E Series)
Product Name：FURSE ESP Signal SPD PCB mount (E Series)
Product Model：ESP PCB/06E,ESP PCB/15E,ESP PCB/30E,ESP PCB/50E,ESP PCB/11
Updated：2010.04.08
Views：3
Protectors for PCB mount data, signal and telephone lines which require lower in-line resistance an increased current or a higher bandwidth than the PCB/**D 19
Use where transient overvoltage protection needs to be integral to the OEM signal or data communications systems, and where these systems are resistance sensitive, or have a higher frequency or running current
| Product part codes: | |
| ESP PCB/06E | Use with working voltages of up to 6 volts |
| ESP PCB/15E | Use with working voltages of up to 15 volts |
| ESP PCB/30E | Use with working voltages of up to 30 volts |
| ESP PCB/50E | Use with working voltages of up to 50 volts |
| ESP PCB/110E | Use with working voltages of up to 110 volts |
 |
Suitable for wave soldering |
|
Very low let-through voltage (enhanced protection to BS EN 62305) between all lines - Full Mode protection |
|
Full mode design capable of handling partial lightning currents as well as allowing continual operation of protected equipment |
|
Provides repeated protection in lightning intense environments |
|
Very low (1) in-line resistance for resistance critical applications |
|
High (1.25A) maximum running current |