Three phase extra high maximum surge current capacity

Product Name:Three phase extra high maximum surge current capacity
Product Model:ESP 415 M2,ESP 415 M4,ESP 480 M2,ESP 480 M4
Updated:2010.04.01
Views:3


Protectors with an extra high maximum surge current capacity for three phase mains power supplies 6

Use ESP M2 versions on main distribution panel for buildings with a Class III or IV structural LPS fitted or exposed 3 phase power lines where no LPS is fitted. Use ESP M4 versions on main distribution panel for buildings with a Class I or II LPS fitted
Product part codes: | |
ESP 415 M2 | Use on three phase mains supplies of 346-484 volts |
ESP 415 M4 | Use on three phase mains supplies of 346-484 volts |
ESP 480 M2 | Use on three phase mains supplies of 402-600 volts |
ESP 480 M4 | Use on three phase mains supplies of 402-600 volts |
![]() |
Very low let-through voltage between all sets of conductors (phase to neutral, phase to earth and neutral to earth) |
![]() |
Full mode design capable of handling high energy partial lightning currents as well as allowing continual operation of protected equipment |
![]() |
Innovative multiple thermal disconnect technology, for safe disconnection from faulty or abnormal supplies (without compromising protective performance) |
![]() |
Three way visual indication of protection status |
![]() |
Advanced pre-failure warning so you need never be unprotected |
![]() |
Remote indication facility allows pre-failure warning to be linked to a building management system, buzzer or light |